Tell What Hardware Your Dz09 Has

You are using an out of date browser. It may not brandish this or other websites correctly.
You should upgrade or employ an alternative browser.

• #one

Having trouble setting upward mms on the DZ09 smartwatch can anyone advise if information technology has been washed.
Thanks for any assistance

• #261

the bluetooth antenna is actually a small wire, you right, depends if that thing has the correct lenght

I don't think information technology's my phone, I have no problems connecting the phone with my Bluetooth headphones or estimator or speakers. So I might be the lookout man, or the software is what I am thinking. I only haven't had fourth dimension to become on the computer and figure out how to extract the firmware. Didn't empathise the guides to well when I was looking at them.

• #262

I don't recollect it's my phone, I have no issues connecting the telephone with my Bluetooth headphones or computer or speakers. So I might be the scout, or the software is what I am thinking. I but haven't had time to keep the computer and effigy out how to extract the firmware. Didn't understand the guides to well when I was looking at them.

Point me please the guides are non very clear for you, maybe we can do some improvements for tutorials

• #263

very weird, mine is getting connected automatically even if I'yard non using the app (just pure bluetooth paired connectedness), did y'all modify something in the engineer bill of fare about bluetooth?

It'south not Problem of app "BT Notification" or "Fundo". I've uninstalled it, merely pure BT connection has the aforementioned behaviour. If connected, then stable. Even on relative long altitude. Only if too long distance, device is disconnected and in lxxx% fail automatically to connect.
Successfulness is amend, if disconnected on short time.

• #264

It's not Trouble of app "BT Notification" or "Fundo". I've uninstalled it, but pure BT connexion has the aforementioned behaviour. If connected, then stable. Even on relative long altitude. But if too long altitude, device is disconnected and in 80% fail automatically to connect.
Successfulness is better, if disconnected on short fourth dimension.

After you lot do a fill-in for your original firmware maybe it worth to wink a dissimilar ane

• #265

After you do a backUP for your original firmware maybe it worth to flash a different one

Yep. I think, it's the only way. But not immediately. I own watches few days merely, and then I want yet little bit to play, earlier I make brick from watches

• #266

Point me please the guides are not very clear for y'all, perhaps we tin can do some improvements for tutorials

Won't be domicile for another two days, simply I'll bulletin you the guide of the i I was confused on later on tonight.

• #268

Hey Golem_ i have a question... is there a way we could extract the digital clock file from the Aplus lookout man ROM and add it too the Stock DZ09 ROM? I dearest the clock that'due south digital, sadly the camera doesn't piece of work and that's pissing me off tbh. Thanks :3 ~Sky

---------- Post added at 07:01 AM ---------- Previous postal service was at 06:06 AM ----------

Oh PS if yous don't mind me bugging you again lol, what programme could i use to totally edit a ROM, almost like a ROM architect for a mtk6260a processor? Also MTKrecourse editor. Pitiful once again for all the questions, and thanks for your patience.

• #269

Hey Golem_ i have a question... is in that location a fashion we could extract the digital clock file from the Aplus watch ROM and add it likewise the Stock DZ09 ROM? I dear the clock that's digital, sadly the camera doesn't piece of work and that'southward pissing me off tbh. Thanks :3 ~Sky

---------- Post added at 07:01 AM ---------- Previous post was at 06:06 AM ----------

Oh PS if y'all don't mind me bugging yous again lol, what plan could i use to totally edit a ROM, almost like a ROM builder for a mtk6260a processor? Besides MTKrecourse editor. Sad again for all the questions, and thanks for your patience.

Unfortunately I didn't observe a way to isolate the digital clock, anyhow, digital clock is a office of the core so is not a bulk of data you can transfer (just my humble opinion)
As for firmware editors, there are some hardware box solution y'all could buy, I cannot say for sure how effective they are or if they indeed are working every bit long every bit I didn't touch one yet
The only way I touched the firmware was reading directly the binary files from firmware kit which are code motorcar, trying to figure out how is built, where are some flags to call, what is the internal structure, etc - in this fashion I accept made readback extractor app
I practice recommend for direct operations hex neo editor - promise you're luckier than me!

• #270

Hi, I just received my DZ09 in the mail service yesterday morning, as a fond rom flasher I was eager to attempt and update the firmware..
The watch information technology's cocky was fine, but like I always do, if information technology's a motherboard, a phone, a Tablet.. I'thousand always flashing new stuff to it..

It was sold as a DZ09 on Ebay, but the device information technology's cocky Recognized it's self equally an M9?
The description on Ebay looked spot on.. The device worked right out of the box..

I went to:
http: //niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html

I hope that link doesn't get edited out.. Well I have flashed about every DZ09 Firmware that has been posted..
fifty-fifty the Chinese versions, though they are listed as English though..
I tried to make a backup of the Firmware before flashing but somehow it didn't salvage.. And at present though The device looks normal, the Digitizer is inverted.. Every button is though labeled properly but to press "Back" or any other button i press the opposite side of the screen to go information technology to piece of work.. I had this problem one time with an LG phone, merely this is a unlike beast.. Tin can anyone shed any light on this?
It seems to be a Bear on Screen Driver outcome...

I like the watch but similar a moron I had to see if I could update the freaking Firmware and I'm stuck with an inverted Digitizer now..

Any assist would be appreciated

Edit: I'm wondering if someone who might accept a fill-in to share.. I would be ecstatic if I could discover one..

Concluding edited: January 29, 2016

• #271

How-do-you-do, I but received my DZ09 in the mail yesterday morning, equally a fond rom flasher I was eager to try and update the firmware..
The watch information technology's self was fine, simply like I ever do, if it'south a motherboard, a telephone, a Tablet.. I'm e'er flashing new stuff to information technology..

It was sold every bit a DZ09 on Ebay, but the device it's self Recognized it's cocky equally an M9?
The description on Ebay looked spot on.. The device worked right out of the box..

I went to:
http: //niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html

I hope that link doesn't get edited out.. Well I have flashed well-nigh every DZ09 Firmware that has been posted..
even the Chinese versions, though they are listed every bit English though..
I tried to make a fill-in of the Firmware before flashing but somehow it didn't save.. And now though The device looks normal, the Digitizer is inverted.. Every push is though labeled properly but to press "Back" or any other button i printing the opposite side of the screen to get it to work.. I had this problem once with an LG phone, but this is a different beast.. Can anyone shed whatsoever light on this?
Information technology seems to be a Affect Screen Driver issue...

I like the watch simply similar a moron I had to see if I could update the freaking Firmware and I'm stuck with an inverted Digitizer at present..

Whatsoever help would be appreciated

Edit: I'm wondering if someone who might take a backup to share.. I would be ecstatic if I could find i..

Human, you lot had to exercise a readback earlier! Try these - link -
few of them are a good match to your watch even if y'all loose the camera control
As soon as will announced the version for your sentinel I'll give you a sign

Last edited: Jan 29, 2016

• #272

Hello I have problem with my dz09. On the watch I can see who called to me (information from smartphone) merely when I want to see letters from my phone or I desire to control the camera on the phone. Displays the message "please installBT Notifier"""" app in remote device"""" What tin can I do or what tin yous do? On my phone I installed BT Notification.

• #273

Need some help with operation.

How-do-you-do, I'm from México and after consulting several watch-phone reviews, I found that this little fellow has the best value for coin. I am very pleased with information technology, only I take a couple of questions:
a) Is there a way to connect a headset via Bluetooth?. I can not link a headset that I have and it is very uncomfortable that everyone hear the speaker.
b) The pedometer needs a bit to run?. I can not arrive count my steps, simply works as a chronometer.
Addendum images of the phone information
P.S. Sorry for google translation use.
//lh3.googleusercontent.com/--Pmo_6upPHg/VqvJIVXuAGI/AAAAAAAAAHk/mEGCpq7ZsSE/h120/IMG_2093.JPG
//lh3.googleusercontent.com/-Ra8awsPRUvM/VqvJIBLhijI/AAAAAAAAAHc/8qs6iYeGCO0/h120/IMG_2096.JPG
//lh3.googleusercontent.com/-k6VzFm4rKug/VqvJIeEsA3I/AAAAAAAAAHg/oiZ6DBiaT3w/h120/IMG_2097.JPG

• #274

Hello, I'g from México and after consulting several watch-phone reviews, I institute that this piffling fellow has the best value for coin. I am very pleased with it, but I have a couple of questions:
a) Is there a way to connect a headset via Bluetooth?. I tin can not link a headset that I have and it is very uncomfortable that anybody hear the speaker.
b) The pedometer needs a chip to run?. I tin not make it count my steps, only works equally a chronometer.
Annex images of the phone data
P.South. Lamentable for google translation use.
//lh3.googleusercontent.com/--Pmo_6upPHg/VqvJIVXuAGI/AAAAAAAAAHk/mEGCpq7ZsSE/h120/IMG_2093.JPG
//lh3.googleusercontent.com/-Ra8awsPRUvM/VqvJIBLhijI/AAAAAAAAAHc/8qs6iYeGCO0/h120/IMG_2096.JPG
//lh3.googleusercontent.com/-k6VzFm4rKug/VqvJIeEsA3I/AAAAAAAAAHg/oiZ6DBiaT3w/h120/IMG_2097.JPG

a) you connect the headset in the most common way possible, if your headset ask for password exist sure you type it correctly on the watch screen

b) pedometer needs only to printing get-go, pedometer has no chronometer, delight press on pedometer icon, hope you do not confound the chronometer with pedometer, they are two different applications in menu

---------- Post added at 11:22 PM ---------- Previous post was at 11:18 PM ----------

Hullo I have problem with my dz09. On the watch I tin can see who chosen to me (data from smartphone) but when I want to see letters from my phone or I desire to control the photographic camera on the phone. Displays the message "please installBT Notifier"""" app in remote device"""" What can I do or what can you exercise? On my phone I installed BT Notification.

In your question yous answer yourself! Aye, you have to install BT Notifier but not BT Notification! get here - link - install it on your telephone and come back with some feedback about how flawless your watch is working

• #275

Thank you lot for your prompt response Golem, I begin to see that nosotros have unlike firmware (firmware GV08?) equally the pedometer on my telephone have chronometer, but does not work the pedometer (only the chronometer). Maybe this firmware is why it does not work the pedometer. I'll effort to flash the firmware of the Aplus (to have digital clock face up) and I promise the camera and pedometer work properly. Past the style, I have Windows 7 and I tin not brand the wink tool piece of work; I hope to have ameliorate luck in Win XP.
//lh3.googleusercontent.com/-vsv3FnUF92A/VqwUVlskRBI/AAAAAAAAAIA/R9sGK1f8bwk/h120/Imagen2.jpg
//lh3.googleusercontent.com/-fdiNJzn_Tbk/VqwUVhf4MzI/AAAAAAAAAIE/aun6o0UKBKA/h120/Imagen1.jpg

• #276

Man, you had to do a readback before! Try these - link -
few of them are a good match to your watch even if you loose the camera command
Equally before long every bit volition appear the version for your sentry I'll give y'all a sign

Cheers so much in that location are a couple from the GT08 Firmware that fixes the trouble, its something.. and the Camera does work too..
I ordered another DZ09, nineteen dollars American, and then Ill see if I can pull the Firmware from it when information technology gets to me... a Week or so and post that Firmware for whatever others who have made the same mistake.. I really appreciate your help..

Edit:
Now I wonder if I tin can mix and match those files that are flashable through the CFG file... The GT08 Seems to wink fine, but the interface is UGLY, but functional.. It seems to be modded with some XDA goodness.. I wonder if there is a way to mix the interface with the Stock and go the Drivers for the Digitizer to piece of work every bit well? Possible??

Terminal edited: Jan 30, 2016

• #277

Thanks for your prompt response Golem, I brainstorm to see that nosotros have dissimilar firmware (firmware GV08?) as the pedometer on my telephone have chronometer, but does not work the pedometer (only the chronometer). Maybe this firmware is why it does not work the pedometer. I'll try to wink the firmware of the Aplus (to take digital clock face) and I hope the camera and pedometer work properly. Past the way, I take Windows 7 and I can not make the flash tool work; I hope to take better luck in Win XP.
//lh3.googleusercontent.com/-vsv3FnUF92A/VqwUVlskRBI/AAAAAAAAAIA/R9sGK1f8bwk/h120/Imagen2.jpg
//lh3.googleusercontent.com/-fdiNJzn_Tbk/VqwUVhf4MzI/AAAAAAAAAIE/aun6o0UKBKA/h120/Imagen1.jpg

Homo, do before a full readback, many guys around flashed before to put in safe their ain firmware and after accept discovered that all other firmwares they establish didn't match their hardware!
Windows vii is working with flash tool, the trouble is your computer USB, if you take USB three or to a higher place will non piece of work, alter the plug, some computers have a pair of USB three and a pair of USB ii

---------- Post added at 05:00 AM ---------- Previous post was at 04:41 AM ----------

Thanks so much in that location are a couple from the GT08 Firmware that fixes the problem, its something.. and the Camera does piece of work besides..
I ordered another DZ09, 19 dollars American, so Ill run across if I tin can pull the Firmware from information technology when it gets to me... a Week or and then and post that Firmware for any others who have made the same error.. I really appreciate your help..

Edit:
At present I wonder if I can mix and lucifer those files that are flashable through the CFG file... The GT08 Seems to flash fine, but the interface is UGLY, but functional.. Information technology seems to be modded with some XDA goodness.. I wonder if there is a style to mix the interface with the Stock and get the Drivers for the Digitizer to work every bit well? Possible??

Glad your watch is back alive Yeah, you tin can extract easily the firmware from the new watch
As near mixing, human, you accept to purchase a huge amount of watches in order to obtain their OS SDK. In that location is no other chance, our watches are based on a very weird technology, the information stays in flash retentivity compressed, by an algorithm some of it is getting decompressed chunk by chunk in the RAM zone some of it just partially. Pinch and decompression is hardware similar so no way to crevice the thing. . . sounds scary? information technology is!

Last edited: Jan thirty, 2016

• #278

Homo, exercise before a full readback, many guys around flashed before to put in safety their own firmware and after have discovered that all other firmwares they institute didn't friction match their hardware!
Windows 7 is working with flash tool, the trouble is your computer USB, if y'all have USB 3 or above will non piece of work, change the plug, some computers have a pair of USB 3 and a pair of USB 2

---------- Post added at 05:00 AM ---------- Previous post was at 04:41 AM ----------

Glad your watch is back alive Yep, you tin can extract easily the firmware from the new spotter
As near mixing, man, yous have to buy a huge amount of watches in order to obtain their Os SDK. At that place is no other risk, our watches are based on a very weird technology, the information stays in flash memory compressed, by an algorithm some of it is getting decompressed chunk past chunk in the RAM zone some of it just partially. Compression and decompression is hardware like and so no fashion to crack the thing. . . sounds scary? it is!

Yeah information technology'southward working again, the interface tin exist a little desired.. It's pretty ugly just yeah it works..
I'grand post-obit the directions on how to brand a backup,

Firmware installation
i. Ability off your DZ09
2. Open Flashtool.exe
three. On Download tab, hit Download Agent and open MTK_AllInOne_DA.bin
4. Striking Scatter/Config File and load .cfg file inside firmware folder
5. Select Options, brand certain y'all tick "backup->Download/Format->Restore" on Fill-in and Restore tab

I'm not agreement it, its non bankroll upwards, and if I could... How exercise I restore? Does it restore the entire ROM/Firmware? or is it just the basic settings? I'm looking the Flashtool at Options "Backup and Restore" at (Backup -> Download/Format -> Restore)
Information technology looked like it did some kind of support in the Desktop/Flashtool/Backup with some kind of hash number.. I ordered a new indistinguishable watch.. I'm hoping i can back up that device somehow, and then restore it to the one I'm using now.. I much prefer the original DZ09 Interface.. Though I'm eternally grateful that you lot helped me get it running in the showtime identify.. Now information technology'south fill-in the new one, and restore it to the old one.. I'k non completely familiar entirely with the Flashtool.. I practice non desire to make the same error I made that got me into this mess to begin with.. And again thanks.. At least my watch is working..

• #279

Hello, and so any follow up/result on this? I just got my watch for a coupla days and the phone info is exactly the aforementioned every bit yours. Then is this the clone one? Can we fix information technology? I am referring to Reigns1989 post
Thanks

Last edited: January 30, 2016

• #280

Yeah information technology'due south working again, the interface can be a little desired.. Information technology's pretty ugly only yeah it works..
I'yard following the directions on how to make a backup,

I'm non understanding it, its not backing up, and if I could... How do I restore? Does it restore the entire ROM/Firmware? or is it just the basic settings? I'm looking the Flashtool at Options "Fill-in and Restore" at (Fill-in -> Download/Format -> Restore)
It looked similar it did some kind of back upwards in the Desktop/Flashtool/Fill-in with some kind of hash number.. I ordered a new duplicate sentinel.. I'm hoping i can back upwards that device somehow, then restore it to the one I'thou using now.. I much prefer the original DZ09 Interface.. Though I'one thousand eternally grateful that y'all helped me get it running in the commencement place.. Now it's backup the new one, and restore information technology to the former one.. I'k not completely familiar entirely with the Flashtool.. I exercise non desire to make the same mistake I made that got me into this mess to begin with.. And again thank you.. At to the lowest degree my watch is working..

Homo, thought you read already some posts or my thread which is talking right near this. That backup you're talking virtually is very important too, why, is restoring back your IMEI (most important) your settings, it saves you time you'd spend for writing dorsum IMEI, so go here - link - and find how to make a full backup of your firmware

Final edited: January 30, 2016

Like threads